Flooring Calculators

Last updated .

These five pages are the floor finish. Tile counts pieces from the tile face plus the grout joint, then boxes from the floor area after waste. Grout is the pounds in the joints. Thinset is bags under the tile from a planning coverage per 50 lb bag. Flooring adds up to three rooms and applies a pattern waste. Self-leveling is a bagged compound from the area, the average depth, and the cubic feet printed on the bag.

Screed stays on the masonry hub. That page is a sand-and-cement mix, with cement bags and sand volume. It is not this self-leveling count. There is no separate square-footage page. Multi-room area is the flooring calculator. A structural slab is the concrete hub.

Which calculator do I need?

Job Open
Tile count, with the grout joint and boxes Tile
Grout in the joints, in pounds and bags Grout
Thinset bags from a trowel notch Thinset
Several rooms, with waste by pattern Flooring
Self-leveling compound from a labeled yield Self-leveling
Sand-and-cement screed, on the masonry hub Screed

Guides

  • Tile waste

    Straight, diagonal, herringbone, and large-format allowances, and why the percent on the calculator stays editable.

All guides

Calculators

Tile calculator

Tile count from area, tile size, and grout joint, plus boxes at the coverage you type.

Grout calculator

Grout in the joints from tile size, joint width, depth, and area, in pounds and bags.

Thinset calculator

Thinset bags from area and a planning coverage per 50 lb bag.

Flooring calculator

Up to three rooms, waste by pattern, and boxes from the coverage you type.

Self-leveling concrete calculator

Self-leveling bags from area, average depth, and a labeled bag yield.